Kit accessories

Showing 1-7 of 7 item(s)

Steel

Damascus carbon to make your blade

€167.80

Make your own blade from this block of damascus carbon steel forged in our Laguiole workshops. Forged by hand, each damascus block will have a "wild" pattern that makes it unique. This block, measuring a minimum of 120x22 mm, has been ground to a thickness of 3.1 mm to make a 12 cm Laguiole knife blade. The damascus pattern shown in this photo is...

Screws, drills and tips

Bag of 10 stainless steel screws for Laguiole kit

€2.80

Diameter 2.2 mm - Length 12 mm For hard wood, drill it 2.1 mm For tender wood, drill it 2 mm Vis laiton : Phillips 0 - Vis inox : Phillips 1

View

Screws, drills and tips

Drill for soft woods (diameter 2.0)

€2.60

View

Screws, drills and tips

Bag of 10 brass screws for Laguiole kit

€2.80

Diameter 2.2 mm - Length 12 mm For hard wood, drill it 2.1 mm For tender wood, drill it 2 mm Brass screws: Torx T6

View

Screws, drills and tips

Tip Torx T6 for brass and stainless steel bolsters

€5.20

View

Screws, drills and tips

Drill for hard woods (diameter 2.1)

€2.70

View

Assembly instructions

Instructions for a Laguiole Honoré Durand's self-assembly

Ladies and gentlemen, dear customer. Thank you for your interest in our Laguiole cutlery. You will find below the download link for a Laguiole kit. Feel free to send us your comments or questions, or even to send us photos of your Laguiole once finished viaour contact page.

View